Open or close the menu
CANTCU Transmission Controller
CANTCU Transmission Controller - Image 2

CANTCU Transmission Controller

1089,00 € excl. VAT

CANTCU is our standalone CAN-based transmission controller for ZF 8HP and BMW DCT transmissions.

Designed to retain OEM-level drivability while giving you full control over the transmission and its integration into the vehicle.

  • OEM-level drivability and shifting
  • Race+ live transmission control
  • 40+ ECU integrations
  • Built-in 8HP TCM Tool

Available on backorder

Safe and secure payment methods
Fast shipping worldwide

SKU: CANTCU-1
Category:

Additional information

Weight 0,8 kg
Dimensions 26 × 19 × 7 cm
Country of Origin

Finland
HS Code

8537109160

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

OEM drivability. Full control.

The heart of every build. CANTCU is our standalone CAN-based transmission controller, designed and developed in-house to bring modern shifting performance to any project. From hardware to harnesses and add-ons — everything here powers the perfect shift.

Advantages

  • OEM-level drivability in all driving situations
  • Retains the original transmission control module
  • Original transmission safety functions remain active
  • No internal TCM modifications or soldering required
  • Wide support for standalone and OEM ECUs
  • Flexible CAN, analog and digital I/O
  • Built-in transmission diagnostics and realtime monitoring
  • Integrated transmission flashing tools
  • Race+ live transmission control on supported 8HP models
  • 8HP TCM Tool for identification, backup, programming and setup

Package Contents

  • CANTCU Control Unit
  • 24-pin Connector and pins
  • USB-A to USB-B cable
  • 4x 120 ohm terminating resistors

Supported transmissions

CANTCU supports a wide range of ZF 8HP and BMW DCT transmissions.

  • 8HP45 / 70 / 90
  • 8HP50 / 75 / 95
  • BMW 8HP51 / 76
  • BMW E-Series GS7D36SG
  • BMW F-Series GS7D36SG
  • BMW F-Series GS7D70SG

The 8HP TCM Tool supports 8HP45 / 50 / 70 / 75 / 90 / 95 regardless of original vehicle manufacturer, allowing transmissions from BMW, Dodge, Jaguar, Land Rover, Maserati, Alfa Romeo and other applications to be prepared for CANTCU use.

See the full support matrix and installation requirements.

Supported ECUs

BMW E6/7/8/9x
E38/39/46/53/83
MaxxECU
Emtron
Motec
Haltech
ECUMaster
AEM Infinity 5 Series
MB EGS51/52
MB VGS
GM E38/67/92
… and a lot more

Check here for full support description and requirements

NOTE: The product may or may not be permitted for road use in your country. If you’re unsure, please verify before buying.

CANTCU
Configurator

CANTCU doesn’t stop at hardware — the Configurator gives you the tools to dial it in exactly how you want.

Developed in-house by CANformance Engineering, the Configurator provides a clean and intuitive PC interface for setting up and fine-tuning your transmission system.

From initial installation to advanced calibration, it lets you adjust key parameters, monitor live data, and manage firmware updates with ease.

Configure CANTCU, monitor realtime data, record and analyze logs, read transmission diagnostics, update firmware and access the built-in flashing and 8HP TCM tools from one Windows application.

With Race+, transmission behaviour can also be adjusted live — including shift maps and other transmission settings — without repeatedly reflashing the TCM.

Every CANTCU deserves a proper toolbox — and the Configurator is exactly that.

want to buy straight from
your local dealer?

cantcu is available in 30 countries wolrdwide

find your local dealer here

Built from passion, refined through performance

CANformance Engineering started in 2021 with one goal — to make modern transmissions work anywhere, in anything. What began as a one-off solution for a personal car became CANTCU: a standalone CAN-based transmission controller now used by drivers and racers around the world.

From garage builds to professional race cars, our products bring modern transmission technology to any build — because every car deserves perfect shifts.

Sincerely,
Kenneth Blomstedt
Founder of CANformance

Related products